Bookmark and ShareWelcome to EONON for online shopping! Sign in New customer?Start here.                There are customers online.
You are here : Home > Product > Stand Alone

9 Inch Car Stand Alone Monitor + Bracket

Model No. : E0969

Stand Alone

9 inch wide view angle TFT LCD screen
-In-Car LCD monitor Bracket included
-Display Mode: 16:9
-Video System: NTSC/PAL
-Pixels: 800 x RGB x 480
-AV IN and earphone IN on the panel
-RCA in and out
-Reversing auto switching function
-Can also replace headrest monitor screen
Currency:
Price USD $110.00  
Select your location to check shipping fee
(Free Shipping to USA , AU , UK)
Shipping Fee:

 
Quantity:   Usually shipped in: 48 hours
closeThis item has been added to your cart.
  • Please Waitting ...
  • Check Out Continue shopping

  • General
    - Power supply: DC 12V
    - Power consumption: 12W
    - Operation temperature: 0 ~ 40 °C
    - Storage temperature: -20 ~ 60 °C
    - Video System: PAL/NTSC
    - Support Remote Control Function 
    -Can also replace headrest monitor screen

    Screen
    - 9inch wide view angle 16:9 display mode
    - Image brightness/contrast/color/saturation Adjustable
    - Pixels: 800 x RGB x 480 

    Input & Output
    - RCA in and out
      1-channel video in (male)
      2-channel AV in (female 1 video and 1 audio)
    - AV IN and earphone IN on the panel 

    Accessories
    - 1 x Main unit
    - 1 x Remote controller
    - 1 x AV cable
    - 1 x Power AV cable
    - 1 x Bracket Bag 

    Installation by In-Car LCD monitor Bracket:
    1. Remove the headrest from the seat, slide on the adjustable bracket and adjust to approximately fit the headrest
    posts.(Spacing of the two posts from 115mm to 185mm is available)
    2. Stick the gasket onto the block
    3. The arm can be horizontally turned by 180°, the connector can be turned by 360° and the connecting device can be turned by 100°
    4. Installation of the LCD monitor
    - Press the switch and offload the fasten device
    - Fit the fasten device on the L-type bracket and then install the LCD from the bottom with the screw provided
    - Fit the fasten device onto the rail at the back of LCD
    - Install the LCD on the bracket

     

     Note:
    1. All of our car DVD players fit any car or truck except some special car brands and models. See our special car DVD player page for more information. Please check the player position height of your car. If 50mm, please select from 1 Din series; and if 100mm, please select from 2 Din series. The DIN series is universal.

    2. Units will be shipped within 48 hours of payment confirmation. Delivery can be expected within 3-5 days!

    3. Payment may be made via:PayPal, Bank in, T.T. (Telegraphic Transfer), and Credit Card

    4. Our products can be delivered to ANY country in the world. Free shipping is provided to 22 countries. Please click for more details.

    5. Import duties, taxes and charges are not included in the item price or shipping charges. We are not responsible for these charges. Prior to ordering, please check with the customs office in your country for further information on these charges.

    6. All products have a 2-year warranty. If a product is factory defective, please send it back for a replacement item within 7 days of the delivery date.

    7. If you have any questions, please contact our online support immediately, or write an email to eonon.com@sbo2.net. All emails will receive a response within 24 hours.

    Write an question:
    Message:
     
    Related Accessories