Position:Home » Car Radio » content

How To Install Backup Camera In Cars?

2012年10月19日 18:12:38  category: Car Radio  read: 人  comment

Cars have become a necessary part of our every day life have wider popular appeal. There is a variety of Car DVD to choose in the vehicle market. Individuals who have enthusiasm for cars have fondness for Automobile electronic devices devices with every prospect. There is also trend to buy the automobile devices on their own do the do-it-yourself install for a immense number of automobile owners. They will give you instructions on how to put in backup Camera.

Before commence mounting the gadget, you need to prepare the following Car DVD Players tools in advance. Here is a list of the tools: solder, screws, electrical tape cordless drill.First, select an appropriate position for the backup camera. It is advised to put in the backup camera as close to the middle of the automobile as feasible. Besides, make positive that there will be no hindrance like hitches, bumpers or so that can decrease the field of vision.

Second, fasten the power wire of the backup camera together to the reverse wire of the Car GPS. Use an electrical tape to seal the connection. Receive a neat metal surface to ground to then mount the camera's ground wire using cordless drill tapping screw.Fifth, run signal wire of the vehicle to the monitor. Put the automobile in reverse watch for a video signal to check if the connection installation is OK.

Third, install the backup camera onto the In Car DVD with mounting hardware. Since a variety of backup cameras are designed to be mounted to the license plate frame, you need to make positive that the license plate is not obscured.Fourth, find out the reverse light wire which is located either at the reverse light bulb or at the trailer harness. Have a check on the wire using a multi-meter. When the automobile is in all gears, the result will be 0 volts. In reverse, there will be 12 volts.

The backup camera works with the video monitor together so as to help the drivers have a general clear view of the situation behind the Car GPS Navigation when reversing the automobile. Usually speaking, the signal the video is passed from the backup camera to the monitor with no use of wires, while some automobile reverse camera need a signal wire jogging from the camera to the monitor. Both backup cameras have lovely bad points. It is simple to put in wireless backup camera, while hard-wired can display the situations behind better cost less in comparison.


<< 上一篇下一篇 >>



Tags Lists

Hot topic;


Copyright www.eonon.com. Rights Reserved.